Expert Recommended AccessoriesSelected by Dale, our Expert
Required Accessories9
These accessories are required to properly setup/install this product.
Optional Accessories10
Features
Product Video Disclaimer: "PED is not responsible for any variances from the product in this video and the item you purchase. Please review all product specs prior to purchase."
Commercial Kohler Command Pro CH440 14HP 4-Stroke Engine
4-stage cyclonic air filter perfect for harsh, dirty conditions
Steel-forged crankshaft and cast iron cylinder extends life of engine
Inhales Debris Up To 5.75" In Diameter
Increased capacity highly reduces clean-up time
Large feed chute perfect for trees, leaves, branches, crop straw, etc.
Auto cut blade ensures thorough processing of smaller 2" branches
High Strength Twin Reversible Blades
Fusion welded edges increase longevity of blades up to 4X
Blades can be removed and sharpened or replaced with ease
Get twice the cutting life by flipping the blades when they dull
Innovative Drum Design
Known to outlast competitor drum designs 4:1
Dual V-belt drive system produces cyclone speeds up to 3600 RPM
Tall Omni-Directional Spout
Increased spout height provides perfect clearance for truck-beds
Spout rotates 360° for complete control over discharge direction
Tow-Capable
Easy-to-remove 1-7/8" ball hitch assembly for added convenience
Squared stand adds stability, strength and easily adjusted using hitch pin
Easy Open Chute Latches
No longer need tools to open the chutes
Makes maintenace and jam clearing easy
Free Weather Proof Cover w/ Heavy-Duty Storage Bag
Protect your unit against the harshest conditions
An added value of $59
Also Included:
Wheel base extension & 2 replacement blades
The wheel base extension increases the wheel base from 29" to 48"
Product QuestionsAnswered by Dale, the Log Splitter Expert
Can the PK0915 5" chipper/shredder be towed by a sit-down mower? Does it have a hook-up that attaches it to a sit-down mower?
Lewis S.
from Maryland
October 12, 2020
Answer
If your mower has a 1-7/8" ball attached and has a transmission capable of towing 430 lb's, then this will work, but there is not a specific attachment for rider mowers.
Was this answer helpful?
Yes
3
No
1
How do I adjust the cutting blades?
Debbi D.
from Idaho
August 01, 2019
Answer
The 2 main blades on the drum are not adjustable as they can only be fixed in one position. The only thing one can do with the main blades on the drum is flip them around to use the other side of the blade or replace them. That would just involve removing and putting back on the bolts. Just be careful to not drop the blade or bolts into the drum. The only other blade that is adjustable is the bar blade/anvil located at the base of the drum. You can see the bar blade when the front chute is open. It is held on by 5 bolts. This blade is already set by the factory but it can be adjusted if needed. Loosen all 5 bolts (do not completely take them off) and then the bar blade can be slid up or down a bit if needed. Make sure the whole area is cleaned out and there is no debris inside and once it is set to the desired depth tighten the bolts down. Having a straight edge like a ruler between the blade and bar blade will help keep it in place as it is being tightened down. This would only need to be adjusted over an extended period of time when the bar blade starts to wear down.