Ramsplitter 4-Way Wedge for 16-Ton Models

Don't know why I went without this for so long - it works great!!

Ramsplitter builds all of their units in Rockford, Illinois out of top quality components.

Take a look at the video to see how a 4 way wedge on a 16 ton model rips through a large log.

This is one of their smaller log splitters- imagine how fast your woodpile would grow with a 4 way wedge on a 30 ton unit!

Add the log cradles so you don't have to spend the day picking the split wood off the ground, and you have a classic example of working smarter, not harder.

I would have given the 4-way splitter a 5 star rating if not for having to fabricate the support that slips over the wedge on my log splitter. It was a little loose and would twist slightly. The 4-way splitter did an excellent job by cutting the time in half. I split logs up to 16" in diameter. My splitter is rated at approximately 20 tons. Occasionally I had some logs that would not split. I simply removed the 4-way splitter and slipped it back on to continue.I would recomend this 4-way splitter attachment to anyone who wants to split twice as much wood in half the time.
Money well spent.

I would have given the 4-way splitter a 5 star rating if not for having to fabricate the support that slips over the wedge on my log splitter. It was a little loose and would twist slightly. The 4-way splitter did an excellent job by cutting the time in half. I split logs up to 16" in diameter. My splitter is rated at approximately 20 tons. Occasionally I had some logs that would not split. I simply removed the 4-way splitter and slipped it back on to continue.I would recomend this 4-way... more

Needs to be made out of harder steel. After one cord of splitting its all bent up. Not worth the money, have a weld shop make one.

I have split about 2 cords now with this and it seems to work well with logs that are no more than 9-12 inches large. You also need to line up the log with the cross which is sometimes a bit awkward with large logs. Easier in vertical mode.

Weld splatter had to be filed down before use-sloppy in my opinion. Also needed to sharpen the cross blade since it came almost flat dull. Overall a good unit that I hope will last a long time. It does save time doing 4 way splits.

I had to adapt my Ramsplitter to fit my older splitter, but it works very well & has saved me a lot of time. Because it's very easy to remove I can quickly change from very big pieces then to switch to my four way... I would recommend this to anyone that wants to split a lot more wood in less time...